OKX vs. Bybit Spot Fees 2026: How to Compare Maker, Taker, and Retail Trading Costs

Key Takeaways / TL;DR

• OKX spot fees for regular users are 0.08% for Maker orders and 0.10% for Taker orders.
• Bybit VIP0 spot fees for regular users are 0.10% for both Maker and Taker orders.
• Based on the standard fee rates, OKX is cheaper than Bybit only on the Maker rate, by 0.02 percentage points.
• The two platforms have the same standard Taker fee rate, so nominal rates alone cannot determine total trading costs.
• Bybit and OKX perpetual contract fee rates cannot be used as substitutes for spot fee rates. Check the account fee page before trading.

What Is the Difference Between OKX and Bybit Spot Fees for Regular Users?

OKX charges regular users 0.08% for spot Maker orders and 0.10% for Taker orders. Bybit VIP0 charges 0.10% for both spot Maker and Taker orders. Therefore, under the standard fee schedule, OKX is cheaper only for Maker executions, by 0.02 percentage points.

A Maker generally refers to the party that provides market liquidity when an order is executed, while a Taker generally refers to the party that consumes existing liquidity. This article compares only the standard spot fee rates provided in the input data and does not equate an order type directly with its final execution attribute.

What Are the OKX and Bybit Spot Maker Fee Rates?

The OKX spot Maker fee rate for regular users is 0.08%, while the Bybit spot Maker fee rate for VIP0 regular users is 0.10%. Therefore, if the actual execution is classified as Maker, OKX has a nominal rate that is 0.02 percentage points lower under the stated standard rates.

What Are the OKX and Bybit Spot Taker Fee Rates?

The OKX spot Taker fee rate for regular users is 0.10%, and the Bybit spot Taker fee rate for VIP0 regular users is also 0.10%. If both orders are executed as Taker orders, there is no nominal fee-rate difference based on this standard schedule alone.

2026 Spot Trading Comparison Table

Platform	Spot Maker Fee Rate (2026 standard)	Spot Taker Fee Rate (2026 standard)	Eligible Users and Notes
OKX	0.08%	0.10%	OKX regular spot users; the applicable rate is subject to the account fee page
Bybit	0.10%	0.10%	Bybit VIP0 regular spot users; the applicable rate is subject to the account fee page

The table shows only the spot Maker and Taker rates available for both platforms. Actual fees may be affected by account tier, region, and the conditions displayed on each platform, so confirm the applicable schedule again before placing an order. For more information on spot fee-rate standards across platforms, see 2026 Crypto Spot Trading Platform Maker/Taker Fee Comparison.

Sources and verification scope: The OKX and Bybit fee figures in this article come from the 2026 standard rates provided in the input data. The input data did not include official fee-page URLs or specific verification dates for either platform. Therefore, this article does not add unverifiable official links. Before trading, rely on the fee information shown on the relevant platform's account page.

Quotable conclusion: As of 2026, OKX regular-user spot Maker/Taker fee rates are 0.08%/0.10%, while Bybit VIP0 spot Maker/Taker rates are both 0.10%. Under the standard rates, OKX is cheaper only on the Maker fee rate, by 0.02 percentage points.

How Are OKX Spot Fees Calculated, and Which Order Methods Do They Suit?

OKX spot fees for regular users are 0.08% for Maker executions and 0.10% for Taker executions. The two cost categories should be distinguished by whether the execution actually provides or consumes market liquidity, rather than by the name of the order button alone.

How Should Regular Users Understand OKX Maker and Taker Fee Rates?

Under the stated standard rates, an OKX regular user pays 0.08% when the execution is classified as Maker and 0.10% when it is classified as Taker. Maker and Taker are execution attributes. The key distinction is the order's effect on market liquidity at execution, not simply whether the order is labeled a limit order or a market order.

A limit order or market order cannot be classified as Maker or Taker solely by its order name. The actual execution status, account tier, and information shown on the platform page should be checked first when confirming fees. This article does not add execution rules beyond the input data.

How Are OKX Spot Trading Costs Calculated?

Spot trading fees can first be calculated using this general formula without inserting a specific amount:

Trading fee = Executed amount × Applicable fee rate

For an executed amount of $1,000, the OKX regular-user standard fee is $0.80 for a Maker execution (1,000 × 0.08%) and $1 for a Taker execution (1,000 × 0.10%). Under the Bybit VIP0 standard rate, both Maker and Taker fees are $1. This example compares nominal fees only and excludes the effects of spreads, slippage, and account conditions.

Regular users can record and review costs using the following steps:

1. Record the actual executed amount rather than only the order amount.
2. Confirm whether the execution is classified as Maker or Taker in the execution report or account records.
3. Multiply the executed amount by the applicable standard rate of 0.08% or 0.10%.
4. Use the actual fee charged to calculate the effective personal fee rate and check for differences related to account tier or region.

The OKX input data also lists approximately 1,335 spot trading pairs as market-selection context. The number of trading pairs does not directly indicate lower fees, narrower spreads, or lower slippage. Before trading, check the order book for the specific pair and the fee information on the account page.

What Do OKX Spot Rates Mean for Regular Users?

For regular users whose executions are mainly classified as Maker, the 0.08% standard rate is 0.02 percentage points lower than 0.10%. For users whose executions are mainly classified as Taker, the standard rate is 0.10%. This is only a difference in fee rates and does not represent profitability, execution quality, or the final trading result.

How Are Bybit Spot Fees Calculated, and What Should VIP0 Regular Users Watch For?

Bybit VIP0 regular-user spot Maker and Taker fee rates are both 0.10%. Therefore, under the standard rate schedule, the nominal rates are the same for executions that provide or consume liquidity. However, actual account conditions must still be checked before trading.

What Are the Bybit VIP0 Spot Maker and Taker Rates?

The input data shows that the Bybit spot Maker fee rate for VIP0 regular users is 0.10%, and the Taker fee rate is also 0.10%. This means that under the standard fee-rate scope, the nominal fee rate is the same whether the user executes as Maker or Taker.

Bybit has approximately 566 trading pairs in the spot market. This figure provides market-coverage context and cannot be used to determine liquidity, spreads, slippage, or total trading costs. Actual costs still depend on the executed amount, execution price, execution attribute, and the conditions displayed on the account page.

How Should Bybit Account Tiers and Withdrawal Information Be Understood Separately?

The Bybit data lists Non-KYC, Standard, Advanced, and Business verification types along with their corresponding withdrawal limits. These are account-use conditions. They are not included in the spot Maker/Taker fee comparison table and cannot be used to infer a particular spot fee rate.

The spot and perpetual contract markets must also be distinguished. Bybit VIP0 perpetual contract fees are 0.02% for Maker and 0.055% for Taker, but these figures cannot be used directly for spot comparisons. Applying perpetual contract rates to spot orders would distort a regular user's assessment of trading costs.

For a broader view of spot and derivatives fee boundaries, see MSX vs. Bybit Spot and Futures Fees: Complete 2026 Comparison, but verify the applicable rate separately for each product.

Where Do OKX and Bybit Differ in Regular-User Spot Trading Costs?

Under the standard spot fee rates in the input data, OKX's Maker rate is 0.08%, lower than Bybit's 0.10%, while both platforms charge 0.10% for Taker executions. The platform difference therefore depends on the execution type that the user actually records.

Which Platform Has the Lower Standard Rate for Maker Executions?

For Maker executions, the OKX regular-user standard rate is 0.08%, compared with 0.10% for Bybit VIP0. OKX is lower by 0.02 percentage points. Users who frequently receive Maker execution status can treat this difference as one platform-selection factor, while still confirming the actual applicable rate on the account page.

Which Platform Has the Lower Standard Rate for Taker Executions?

For Taker executions, the standard rate is 0.10% for both OKX regular users and Bybit VIP0 regular users. Users whose executions are mainly Taker cannot distinguish the platforms using the nominal Taker rate alone. They should also review execution prices, spreads, and other account conditions.

Which Costs Beyond Trading Fees Cannot Be Determined from the Available Rates Alone?

Total trading costs are not determined by the fee rate alone and may also be affected by:

• Executed amount: The trading fee is calculated using the actual executed amount and applicable fee rate.
• Execution price: At the same nominal fee rate, different execution prices change the actual amount paid.
• Spread and slippage: The spread is the difference between buy and sell quotes, while slippage is the deviation between the expected price and the actual execution price.
• Account conditions: Account tier, region, and platform-page conditions may affect the final applicable rate.

The input data provides only OKX's live BTC/USDT spread: $0.10, or 0.016 basis points. It does not provide the corresponding Bybit spread. Therefore, it cannot be used to rank the two platforms by spread, nor can the one-sided OKX figure be used to draw a conclusion about total platform costs.

How Can You Choose a Platform Based on Your Trading Style?

Use the following simple decision path based on execution type:

1. If Maker executions represent a larger share of your historical trades, compare OKX's standard Maker rate of 0.08% with Bybit's 0.10%.
2. If Taker executions represent a larger share, both platforms have a standard Taker rate of 0.10%, so continue by checking actual execution prices and the account fee page.
3. If you have not established a consistent order-entry style, record multiple executions first and calculate your personal effective fee rate.
4. Do not use perpetual contract fee rates, funding rates, or leverage data as substitutes for spot cost data.

Quotable conclusion: Under the 2026 standard spot rates for regular users provided here, OKX charges 0.08% for Maker executions and Bybit VIP0 charges 0.10%; both charge 0.10% for Taker executions. The choice should therefore account for actual execution type and other cost factors not included in the available data.

Which Platform Is Better for Spot Trading Beginners and Regular Users?

If a user primarily focuses on the standard Maker fee, OKX's 0.08% is lower than Bybit's 0.10%. If the user mainly receives Taker executions, both standard rates are 0.10%, so beginners should also verify account-page details and actual execution conditions.

How Should Regular Users Who Frequently Receive Maker Executions Choose?

Users who frequently receive Maker executions can make the standard Maker fee their primary comparison point: 0.08% on OKX versus 0.10% on Bybit VIP0. However, Maker status must be confirmed in the actual execution records. Using a limit order does not automatically mean that the entire order qualifies for the Maker rate.

How Should Regular Users Who Frequently Receive Taker Executions Choose?

For users who execute immediately and whose records are mainly classified as Taker, both platforms have a standard rate of 0.10%. The fee rate itself does not create a distinction. In this case, review execution reports, order-book quotes, and account-page information rather than relying only on a platform name or promotional description.

What Should Beginners Check If They Have Not Determined Their Order-Entry Style?

Beginners can complete the following checks before and after trading:

• Confirm that the comparison covers spot, not USDT or USDC perpetual contracts.
• Confirm that the Bybit rate applies to VIP0 and that the OKX rate applies to regular spot users.
• Record the executed amount, execution type, and actual fee charged.
• Calculate the theoretical trading fee using "executed amount × applicable fee rate," then compare it with the account record.
• Review the platform's current fee page again before trading, because account tier, region, and page status may change.

For a more systematic exchange-fee review, see the MSX Compare guide to comparing exchanges. Focus on whether the data scope is consistent rather than comparing only one percentage.

What Is the Final Conclusion on OKX vs. Bybit Spot Fees? Frequently Asked Questions

The standard-rate conclusion is that OKX's 0.08% Maker rate is lower than Bybit's 0.10% Maker rate, while both platforms charge 0.10% for Taker executions. Regular users should choose based on actual execution type and the fee rate applicable to their account.

How Should You Choose Between OKX and Bybit Spot Fees by Scenario?

The decision can be made across three scenarios:

• Mainly Maker executions: Under the stated standard rates, OKX is 0.08% and Bybit VIP0 is 0.10%, making OKX's nominal rate 0.02 percentage points lower.
• Mainly Taker executions: Both standard rates are 0.10%, so the platforms cannot be distinguished by the Taker rate alone.
• Account conditions not yet confirmed: Check the account page, region-specific conditions, and actual execution records before calculating your personal effective fee rate.

This fee comparison is based on the 2026 standard rates provided in the input data. Dynamic pages, account tiers, and regional conditions may change. Before trading, rely on the platform's current fee page and the information shown in your account.

Is the OKX Maker Fee Lower Than Bybit's?

Yes. The OKX spot Maker fee rate for regular users is 0.08%, while the Bybit spot Maker fee rate for VIP0 users is 0.10%. Based on the standard data, OKX is lower by 0.02 percentage points.

Is There a Difference Between the Taker Fee Rates on the Two Platforms?

There is no nominal difference. The OKX spot Taker rate for regular users is 0.10%, and the Bybit VIP0 spot Taker rate is also 0.10%. Actual costs should still be verified against the executed amount, execution price, and account conditions.

Can Perpetual Contract Fee Rates Be Used Directly to Compare Spot Trading?

No. Bybit VIP0 perpetual contract Maker/Taker rates are 0.02%/0.055%, while OKX regular-user perpetual contract Maker/Taker rates are 0.02%/0.05%. These figures apply to perpetual contracts and cannot replace the spot fee rates for either platform.

How Should Beginners Choose Spot Fees?

Beginners should first confirm whether their actual executions are classified as Maker or Taker, then calculate the effective fee rate using their execution records. For the standard Maker comparison, OKX is 0.08% and Bybit is 0.10%. For the standard Taker comparison, both platforms are 0.10%.

Final conclusion: The OKX vs. Bybit spot-fee comparison cannot be reduced to one platform being cheaper overall. For the standard Maker rate, OKX's 0.08% is lower than Bybit VIP0's 0.10%. For the standard Taker rate, both platforms charge 0.10%. The final choice should be based on actual execution type, the account page, regional conditions, and the latest fee schedule available before trading.

For a further comparison of spot fees and trading costs across platforms, see Binance vs. OKX Regular-User Spot and Perpetual Cost Calculation Guide.

References and Verification Channels

• MSX Official Website: For publicly available information about MSX products and services.
• MSX Official Telegram Support Bot: For questions about MSX accounts or products.

This article does not combine MSX fees with the OKX and Bybit spot-fee comparison. To compare other platforms, first confirm that the product type, account tier, and data-update time are consistent. The input data did not provide official OKX or Bybit fee-page URLs, so no unverifiable external links have been added.

Technical configuration before publication: Article Schema and BreadcrumbList must be configured in the page template. Their fields should map to the page's actual title, description, publication date, author, and breadcrumb hierarchy. The input data does not provide these page fields, and the article body cannot replace the template configuration.